When a homeowner makes the investment to go ahead and buy new appliances, oftentimes they think the installation is relatively easy. Whether it is a dishwasher, garbage disposal, or kitchen range, our modern-day appliances are becoming increasingly complex and the chances of ruining an installation rise as a result. Because of our more complex appliances, the days of simply plugging something in seem long gone. The following, however, is a quick list of tips that should help you with a variety of appliance installations. Note, however, that a trained appliance installation or appliance repair technician can often have your appliance installed in no time within manufacture warranty guidelines.

Dishwasher Installations
A standard dishwasher has three needed connections for an installation: (1) electrical supply cable, (2) a drain line to your sink’s trap or garbage disposal, and (3) a line attached to the sink’s stop valve which brings in water. A must is to ensure that your new instalator sanitar dishwasher will not overload its power circuit and that, furthermore, any changes/installation you attempt is done so while the power is off. Depending on the type of dishwasher, however, there may be a necessary fourth connection for the aerator so it is extremely important to check your dishwasher model, your sink, and make sure you know the necessary steps within the installation process.

Refrigerator Installations
A refrigerator seems like one of those easy appliances that it would be impossible to screw up an installation. Yet, there are some very important guidelines one must follow. First, location is one of those keys components when it comes to your refrigerator. Make sure it is far away from a heat source and, if being installed within a cabinet recess, that there is at least half an inch of space behind, at the top, and to the sides of the refrigerator for proper air circulation.

Range, Oven, and Stove Installations
Your range/oven/stove installation will vary, obviously, depending on whether you have an electric or gas hook-up. Regardless of the hookup, however, again take into account the unit’s location as ranges, ovens, and stoves needed a could deal of adequate ventilation. Electric units tend to be easier to install with the biggest obstacles lying in any necessary configuration of the unit before use. For gas ranges/ovens/stoves it is highly recommended to seek a professional appliance installation technician simply because of the inherent danger in working with gas lines.

Washer and Dryer Installations
There are a few key aspects to installing a washer and dryer. Most current washer brands require a 120-volt connection so be sure that is, in fact, the voltage of the current wiring. When installing, you also have to make sure the washer in level otherwise it will rock when in use. Like the other appliances mentioned, location is important as all cables and hoses should be able to reach their connections without unreasonable strain. The electrical connection needed for a dryer installation will vary more so than your washer so double-check the manufacture’s recommendation. Additionally, with dryers make sure the vent is properly installed and that it never leaded to a crawl space, attic, or otherwise enclosed room.

While these tips are meant to guide you if you are truly capable of installing your appliance, it is still recommended that you first consult a trained appliance installation technician. This is particularly true because your appliance’s warranty may depend on it and can be null if you attempt an installation yourself. Most appliance repair companies offer compatible installation and truly know their way around your home’s appliances.

Leave a Reply

Your email address will not be published.